Job Header

Back to list

Equipment Support and Facility Maintenance Technician

bw_wordkay_placeNoblesville - Indiana - USA

bw_wordkay_timeJul 09, 2019

bw_wordkay_optionFull time

bw_wordkay_idR2019-1840


BorgWarner is a global product leader in clean and efficient technology solutions for combustion, hybrid and electric vehicles. Our facilities are located across the globe to provide local support for our diverse customer base.

 We operate in two groups: The Engine Group develops air management strategies and products to optimize engines for fuel efficiency, reduced emissions and enhanced performance. BorgWarner’s expertise includes engine timing systems, boosting systems, ignition systems, air and noise management, cooling and controls. The Drivetrain Group harnesses a legacy of more than 100 years as an industry innovator in transmission and all-wheel drive technology. The group leverages this understanding of powertrain clutching technology to develop interactive control systems and strategies for all types of torque management.

BorgWarner PowerDrive Systems is currently looking for a “dynamic, results driven” individual to join as an Equipment Support and Facility Maintenance Technician at our Noblesville Technical Center (NTC) in Noblesville, Indiana.

In this role, and under supervision of the Sr. Maintenance Supervisor, the Equipment Support and Facility Maintenance Technician will be primarily responsible for electrical and mechanical troubleshooting and repairs of manufacturing and test equipment. Utilizing a thorough understanding of electrical design and controls, this position supports multiple equipment platforms through the technical center, including installation of new equipment, transition of existing equipment, and predictive and preventive maintenance of test equipment and fixtures.  Flexibility is needed within this role, as projects can lead to daily overtime and weekend support.  Other general plant maintenance duties are required, including but not limited to electrical, plumbing, masonry, carpentry, and automotive type repairs. This occupation requires formal training in industrial electronics and maintenance. 

Key Accountabilities:

  • Perform complex periodic maintenance on automated test and production systems and equipment using knowledge of solid state circuitry, electronics, electrical-mechanical devices, motors, wiring diagrams, schematics, computer based applications and tools.
  • Troubleshoot, repair, align, calibrate, inspect, and diagnose test and production systems containing at a minimum:  sensors, hydraulics, pneumatics, electronics, CNC controls, 3-phase electrical, linear motion, air compressors, pumps, cooling towers, HVAC and industrial lighting.
  • Fabricate and assemble mechanical components to repair, modify, or improve processes and increase machine up-time
  • Support the design, installation, and commissioning of new equipment and test systems including infrastructure (electrical, pneumatic, HVAC, etc.)
  • Function in a work order based system including  documentation retention in CMMS (Computerized Maintenance
  • Develop and implement preventive maintenance with written detailed parameters/steps
  • Plan and execute projects and work assignments with minimal supervision

Requirements:

  • High School diploma or GED required
  • College Degree and/or Technical Certificates preferred
  • Minimum 5 years maintenance experience required (8+ years preferred) with a minimum 3 years’ experience in an environment that maintains equipment in manufacturing, test, validation, prototype, or lab environment
  • Experience with inspection, calibration, and repair of automation/test equipment in a manufacturing environment is required
  • Working knowledge of blueprint reading and interpretation including both mechanical and electrical schematics
  • Strong analytical problem solving skills
  • Ability to accurately follow detailed instructions and procedures under limited supervision; deliver customer requirements on time
  • Ability to lift 35 lbs. and stand on feet for 8 hours
  • Ability to perform work at floor level, overhead level, and elevated heights using work platforms, aerial lifts, powered industrial trucks and lift/hoist equipment as needed
  • Electrical aptitude with ability to demonstrate safe work practices while repairing and/or troubleshooting high voltage, typically 480V 3 phase, equipment and systems including panel wiring and field wiring
  • Strong electrical and electronics background preferred: PLC controllers, servo amplifiers, VFDs, sensors, HMI, 3-phase power, AC/DC motors
  • National Instruments with LabVIEW software experience preferred
  • Experience troubleshooting electrical devices at the circuit board level and troubleshooting logic controllers and ladder logic machine control systems preferred
  • Familiarity with equipment-based software management, backup, and support
  • Working knowledge of and/or training in the National Electric Code, NFPA70E standard, and arc flash hazards
  • Ability to work well in a team environment and communicate effectively with all levels of the organization
  • Competency to complete job duties in safe, effective manner including following all OSHA and EPA regulations.
  • Welding & fabrication experience (MIG, TIG, ARC) preferred
  • Strong mechanical knowledge of bearing, motor, and shaft installation and alignment, using precision tools
  • Experience with spare parts management/MRO
  • Flexibility to work multiple shifts, overtime, and weekends

BorgWarner Competencies:

  • Learning on the Fly
  • Action Oriented
  • Functional/Technical Skills
  • Self-Knowledge
  • Informing
  • Drive for Results
  • Decision Quality
  • Interpersonal Savvy
  • Conflict Management
  • Problem Solving

Safety

This position will adhere to Global Star Safety Program, including safety rules, practices and training as outlined in the BorgWarner NTC/WHQ Safety Policy Manual, which includes the use of equipment, protective devices, or clothing that the employer requires.  This individual will work in manners that stress the importance of preventing accidents and illnesses.  He/she must take every precaution reasonable in the given circumstance for the protection of themselves and co-workers.  In addition, he/she is responsible for reporting all injuries and/or possible dangerous situations, incidents, or occurrences to the immediate supervisor.

Equal Employer Opportunity Statement
BorgWarner is an equal employment opportunity employer such that all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Global Terms of Use and Privacy Statement


Carefully read the BorgWarner Privacy Policy before using this website. Your  ability to access and use this website and apply for a job at BorgWarner are conditioned on your acceptance and compliance with these terms.

Please access the linked document by clicking here, select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.

Headline

Close